The Fullstreker Snatch Board is a new device and depending on your installation it can be a mini campus board, at mix and match hang board or the one and only Fullstreker Snatch Board!
What is snatching? Many of the benefits of campusing don’t require the space a big campus board takes up. Simply gabbing that hold fixed higher above our hang boards or favourite rung then coming back down to home and going again achieves many of the gains from campusing and more. With focusing on the single movement it is possible to train with smaller and different holds and those holds at different angles. Snatching converts your finger strength into power by introducing movement.
The Snatch Board is approximately 800 mm* wide by 400 mm* high. There are two board options, a plywood option that is more suitable to installations where the board may come into contact with weather elements like on a verandah. The white logo board is for indoor installations only. The board peppered with special “screw in sleeves” to fix our holds and rungs holds too. These holds and rungs can be repositioned. We recommend for snatching to mount the board horizontally at 12 degrees. We have included "angle markers" to make that installation easy.
Mount the Snatch board vertically and have a mini campus board attaching our range to 400 mm* wide rungs.
Stack Snatch boards on top of each other to make a bigger board and new challenges!
- The Snatch Board - Logo board or pylwood version.
- One 46mm 400* rung.
- Two 19mm 200* holds.
- Two 24mm 200* holds.
- Two 31mm 200* holds.
- Bolts for holds and rungs.
- Allen key.
- Two 12 degree angle makers.
- Fullsterker chalk sample.
- Fullsterker sticker.
Over the coming weeks and months we will add more and more holds to challenge you and your future training. The basic series of holds we have now are based on traditional edges and more than enough to start training with. Remember in the range we have 45 degree and a 60/30 degree angle holds too. All holds in the range is great value and it will be easy to add and mix and match holds with your training goals.
Fullsterker holds and rungs are designed from a replication of Wolfgang Gullich's original small campus rung.
* This is a nominal width, width may vary with production runs by millimetres.
Be The First To Review This Product!
Help other BJR CLIMBING EQUIPMENT users shop smarter by writing reviews for products you have purchased.